kvmhouse.blogg.se - Configure cisco 5505 asa for home use

There are no passwords configured yet, so just leave that blank. (Another option is to click Run Startup Wizard and do this entire configuration in the wizard.) Log in. access-list 2003 permit udp any 192.84.16.0 0.0.0.255 Open a browser on your computer and go to 192.168.1.1, which is the default address for connecting to the Cisco ASA.access-list 2001 permit udp any any dscp af31.access-list 2000 permit udp any any dscp ef.

If subnets are set to high priority or open, specific UDP traffic passing through those subnets does not need to be listed individually. Here are some values users can add to their Cisco configuration file. Information on configuring these settings can be found here

TCP session timer (TLS connections only, port 5443): 300 - 700 seconds Step 4: Enable the rest interfaces with no shut Step 2: Configure the external interface vlan (connected to Internet)SA5505(.

NDNA_asa(config)# failover interface ip faillink 10.4.1.1 255.255.255.0 standby 10.4.1.2 Timers, Ports, Subnets, and DSCP Values for Cisco RoutersĬonfigure the UDP and TCP time out values per the X Series documentation NDNA_asa(config-if)# failover lan faillink vlan 6 This is the basic configuration of the access ports in the Cisco ASA 5505 Firewall. Auto-MDI/MDIX Feature Understanding ASA 5505 Ports and Interfaces The ASA 5505 supports a built-in switch.

Here in the below example, we are taking VLAN 2, VLAN 3, VLAN 4 and VLAN 5 where VLAN 6 will be the failover link and after that all VLANs will be assigned to the interfaces.įig 1.1- Cisco ASA 5505 Failover Sample Topology Lets talk about the Cisco ASA configurations where we configures five VLAN interfaces, including the failover interface which is configured using the failover lan command.Ĭonfiguration Examples for ASA 5505 Interfaces In our previous article we discussed about the Cisco Security: Cisco ASA 5505 Interfaces configuration for Trunk Port and now we are going to discuss about Cisco Security: Cisco ASA 5505 Interfaces configuration for Access ports. We are putting two ASA where one is the primary one and another is the failover ASA in the DMZ zone. Later on, I will come up with the configuration part of the Cisco ASA with the trunk port configurations. Today I am going to talk about the basic Cisco ASA configuration on the access ports and also to make that Cisco ASA with the failover link.